• New
EtherHaul-1200F ODU with ant. port,...
EtherHaul-1200F ODU with ant. port,...
EtherHaul-1200F ODU with ant. port,...
EtherHaul-1200F ODU with ant. port,...

EtherHaul-1200F ODU with ant. port, Tx Low Power: POE & DC with 100Mbps upgradable up to 1GE capacity ports:2x copper+2x fiber

EtherHaul-1200F ODU with ant. port, Tx Low Power: POE & DC with 100Mbps upgradable up to 1GE capacity ports:2x copper+2x fiber
• Frequency: 71-76/81-86GHz, FDD
• Modulation: QPSK/QAM16/QAM64
• Adaptive Rate: Hitless adaptive bandwidth, coding and modulation, boosting system gain by 25dB
• Throughput: 1000Mbps (FD)
• Link Budget: (BER=10-6) 182dB (including 1ft antennas gain)
• Interfaces: 2xGbE 1000BaseT ports
• Antenna: Integrated 1ft (31cm), 43dBi
• Power: PoE+ (IEEE 802.3at with power boost)
• L2 bridging: IEEE 802.1d Transparent Bridging Jumbo frames
• Network Topologies: Ring, daisy-chain and mesh
• Encryption: Optional AES 128-bit and 256-bit
• Management: In-band, out-of-band, embedded CLI, web GUI, SNMPv2/3

EH-1200F-ODU-L-EXT

Siklu's Kilo series products are the most widely deployed on 70 / 80GHz radio waves in the world. This is due to the fact that Siklu has been the first company to launch these advanced products to the market, in addition to being a leader in the segment of multi-Gbps connections in miles away. These products are typically installed on roofs or towers, and with support for external antennas that the customer can deploy from 0.5 ′ to 2 ′ antennas depending on the required range.

Capacities range from 700Mbps TDD with the EH-1200TX product to 10Gbps Full Duplex with the EH-8010. With Siklu's proprietary RFIC implementations, these capabilities are supported at a range of 4.3 miles (6.9 km) and at a cost that has dramatically driven and expanded the market for Gigabit connectivity in E-band spectra.
Capacities range from 700Mbps TDD with the EH-1200TX product to 10Gbps Full Duplex with the EH-8010. With Siklu's proprietary RFIC implementations, these capabilities are supported at a range of 4.3 miles (6.9 km) and at a cost that has dramatically driven and expanded the market for Gigabit connectivity in E-band spectra.
EtherHaul-1200TX (Lv.700) is a low cost, high capacity E-band radio designed for the delivery of commercial, wireless ISP, wireless extension from a fiber demarcation point. The system is based exclusively on a fully silicon design that results in fewer components, greater reliability, and significant price reductions. The additional cost-of-ownership reduction is operating in the licensed, free-cost 70 GHz E-band spectrum, low power consumption and small footprint.

Etherhaul-1200 71-76, 81-86 GHz FDD with connector for external antenna. It operates at an added 700 Mbps. with 2 combo ports: 2xcopper + 2xfiber, includes provider bridge functions (switching, QOS, QinQ), adaptive modulation, and built-in web GUI. It cannot be loaded with any additional licenses, except the AES encryption license.

Carrier class performance and construction

  • Small form factor, outdoor IP67 compliant systems
  • Up to 10Gbps FDD output for maximum ranges of 4.3 miles (6.9km)
  • Proven advanced silicon integration to MTBF 90-yr ter
  • Real-time connectivity with <latency <10µsec to support delay sensitive applications.
  • Optional built-in timing that works with all types of 1588v2 and SyncE packets with SSM schemes to facilitate careful and accurate mobile backhaul synchronization
  • Prioritized payloads using synchronous adaptive modulation without impact with 8 levels of QoS.

Spectrum agility

  • Interference-free operation in the 70 / 80GHz band with TDD or FDD support
  • Up to 10GHz of available spectrum in the 70 / 80GHz bands, pencil-wide beams, with a tiny Fresnel zone up to 32 no overlaps, user-selected channels confirm the industry's highest spectrum reuse factor.
  • One SKU supports the entire range in the 70 / 80GHz band

Flexible topology and interfaces

  • Advanced interconnect tools to create flexible chain topologies, "drop & insert" and resilient sub-50msec rings
  • Designed for easy installation and commissioning using embedded tools to optimize channel selection, load testing and commissioning that require no intervention.
  • With 2-layer support via built-in Gigabit switch with extra copper and fiber ports to enable continuous cascading
  • PoE out for external powering of camcorders and other devices
  • MEF Ethernet OAM and CFM (IEEE 802.1ag / ITU-T Y.1731 / IEEE 802.3ah) compliant for advanced troubleshooting and monitoring
Frequency and Duplexing
71-76GHz / 81-86GHz, FDD
Chanels
16/8 channels without overlap, channel widths 250 / 500MHz
Capacity
Up to 1 Gbps FDD
Link budget
169dB antenna gain ½f / 179dB antenna 1f / 193db antenna 2f
Synchronous Ethernet and 1588v2 TC
No
Power supply
PoE In PoE ++ power consumption without PoE Out 40W
Ports
2x RJ45
PoE-Out
Port 2 (IEEE 802.3at) 26W
No reviews
Product added to wishlist
Product added to compare.

We use our own and third-party cookies to obtain statistical data on the navigation of our users and improve our services. If you accept or continue browsing, we consider that you accept their use. You can change the settings or get more information here