Reference MS-N8032-UH

Leading-edge H.265 Compression

New File System

Applied with the New Milesight File System (MSFS), Milesight NVRs bring completely new user-experience.
· Lock Record File, Tag Video and Playback File Management
· General, Event, Tag and Picture Playback
· Common Backup, Event Backup and Picture Backup
· NAS and Disk Group Function

4K Video Viewing Experience

Milesight 4K H.265 Pro NVR 8000 Series introduces a whole new more smooth operation interface. When direct access to 4K network cameras, it can decode 4K real-time video and recording to provide users with ultra-high-definition video viewing experience.

Optimized Hard Disk Installation

Hardware components are optimized to meet the demands for convenient and stable hard disk installation. With the 4 HDDs tightly screwed in a bracket and the bracket locked in the slots design, the hard disks are surprisingly simpler to mount and the installation time is greatly minimized.

Versatile Interfaces

Milesight 4K H.265 Pro NVR 8000 Series comes with a whole array of ports such as 2 HDMI ports, 2 VGA ports, 3 USB ports, Alarm I/O, Audio I/O and 2 LAN ports. The full set of interfaces provide all necessary features for effective surveillance.

Powerful Decoding and Recording Performance

Milesight 4K H.265 Pro NVR 8000 Series is an ideal for those applications requiring robust decoding and recording performance, for this series can support synchronously decoding 4-CH 4K UHD, 8-CH 4MP and 16-CH 1080P network cameras, and synchronously recording up to 32-CH 5MP high resolution cameras.

Milesight N+1 Hot Spare

Configured as the architecture of N pcs Master NVRs and 1 hot spare slave NVR, Milesight N+1 Hot Spare guarantees the data integrity and reliability of video surveillance system. If any one of the master NVRs fails, the slave NVR can take over the data to ensure continuous video recording. Meanwhile, when the failed NVR recovered, the slave NVR will send the data back to prevent the risk of data loss.

Reliable ANR

Improving the reliability and stability of the storage, the function flexibly allows to automatically store video data on the network camera storage card when the network is disconnected, and retrieves them after recovery of the connection.

Transcoding

Transcoding could be set at M-Sight Pro or NVR web page to transcode the recorded stream into a smaller one, aiming to reduce the network load and provide better playback performance.

Dual LAN interfaces for three network working modes

Multi-address

Two Ethernet interfaces use different IP addresses and work separately in LAN1 and LAN2. One of them could be chosen as default LAN to transmit data.

Load Balance

Two Ethernet interfaces use the same IP address. And they share the bandwidth of the system, which is aimed at increasing the throughput.

Net Fault-tolerance

Two Ethernet interfaces use the same IP address. One is main, and the other is for backup. If the main Ethernet interface is damaged, it will switch over to the backup one automatically to ensure normal function.

RAID 0/1/5/6/10 Supported

RAID (Redundant Array of Independent Disks) is a method of combining hard disks as a logical unit to achieve redundancy and greater speed of writing and reading data. There are 5 different RAID levels (0,1,5,6,10) supported by Milesight 4K H.265 Pro NVR 8000 series, which can be configured according to user’s exact project requirements for data protection and storage space, providing reliability, high availability storage.

VCA

With 10 VCA functions availability, Milesight NVRs label themselves as intelligent on the basis of the powerful file system MSFS.

Advanced Functions: ONVIF / ANR, N+1 Hot Spare/ Keyboard Control/ Video Analysis: Region Entrance, Region Exiting, Advanced Motion Detection, Tamper Detection, Line Crossing, Loitering, Human Detection, People Counting, Object Left, Object Removed
Video/Audio Input: Network Video Input 32-CH / Bandwidth Incoming 256Mbps (200 Mbps RAID) - Outgoing 256Mbps (200 Mbps RAID)
Video/Audio Output: 2-CH (1 HDMI only) 4k 3840x2160@30Hz + 2Ch VGA 1920x1080@60Hz/ Dual Stream / Max. Recording 12MP / Synchronous Playback from 4*(30fps@8MP) to 32*(30fps@720P)
Video/Audio Compression: Video: H.265+/H.265(HEVC)/H.264+/H.264 / Audio: G.711/AAC/G.722/G.726 / Sample Rate 8KHz/16KHz
Storage: 8*SATA HDD(3.5”) + 1*eSATA Up to 10TB for each HDD / Disk Array Type: RAID0, RAID1, RAID5, RAID6, RAID10
Recording Management: Recording Type: Continuous, MotionDetection, Alarm, Smart Event, Event / Manual Snapshot / Video & Image Playback & Backup
External Interfaces: Network Interface: 2*RJ45/100M/1000 + 1*RS-485 for PTZ + 1*RS-232 for Console + 1*USB 3.0, 2*USB 2.0 + 1*RCA input, 2*RCA output / Alarm Input 16-CH Output 4-CH